March 9th, 2023
Are you looking for an easy way to keep your tools and equipment in top condition? Rust and corrosion can quickly ruin expensive tools and cause damage to other items stored in your toolshed, so it’s important to take measures to prevent it from happening.
Fortunately, there is an effective solution: INOX. Our products are designed specifically to protect your tools against rust and corrosion, keeping them in top working order for longer. Here, we’ll outline how you can protect your tools and ensure they last longer than ever before.
What Causes your Tools to go Rusty?
Rust and corrosion are often caused by constant contact with moisture, oxygen and other corrosive elements. Unfortunately, these elements can exist almost anywhere, including in storage sheds and garages. This is why it’s important to keep a regular maintenance schedule for your tools and take protective measures against rusting and corrosion.
When left exposed to damp or humid conditions, your tools can quickly accumulate rust. Even if they’re not used very frequently, they can be affected by the environment, leading to accelerated degradation of the metal surfaces. Additionally, small tools especially can easily get dropped onto a damp or wet surface inadvertently or left out in the rain without you even realizing it.
Fortunately, there are steps you can take to ensure better protection for your tools against rust and corrosion. Regular cleaning is important as it removes dirt, dust and moisture from the surfaces of your tools which otherwise could promote rusting and corrosion due to an accumulation of electrochemical reactions. Additionally, lubricating moving parts with oil will help reduce friction which is known to impair the performance of hand instruments over time.
Finally, applying an appropriate protective coating will help form a barrier between the tool material surface and any damaging elements that might come into contact with your cherished possessions – helping you keep them safe for longer!
What is the Fastest Way to Remove Rust from Tools?
When it comes to protecting your tools and equipment from rust and corrosion, you need a product that does the job quickly and effectively. INOX is Australia’s leading rust remover and inhibitor for both indoor and outdoor use, helping to give your tools the utmost protection from rust.
Using INOX couldn’t be easier. All you need to do is simply spray the affected area with a light mist of one of our products, either MX4 or MX3, making sure to cover the entire surface. Once dry, brush off any remaining flakes and dry before applying a fresh coat for extra protection. Plus, if you are dealing with multiple items in your shed, spraying them with a shot of INOX before storing them away can give them an extra layer of protection against any seasonal effects like humidity or moisture.
The best part is that you don’t have to worry about waiting around while INOX works – as it dries in just 30 seconds! Plus, it provides a lasting effect of up to 12 months when applied correctly, so it’s the ideal choice for keeping your tools clean and safe from rust in the long run.
How to Protect your Tools from Corrosion with INOX
Keeping your tools protected from rust and corrosion is key to making sure they last a long time. You have the option of investing in a good quality toolbox, or you can opt for applying rust-preventive products to make sure your tools stay in great condition.
Luckily, with INOX, you don’t have to worry about corrosion or rust taking over your tools and equipment. INOX provides a range of products that are specifically designed to protect metal surfaces from corrosion, extend their life and improve their performance. INOX also offers unbeatable protection against oxidation and salty atmospheres, perfect for harsh climates such as Australia!
Can Rusty Hand Tools be Saved?
If your tools have already begun to show signs of rust and corrosion, don’t worry; you can help save them from complete deterioration. INOX will help remove any rust, protect the surface of your tools and create a water-resistant barrier that will stop water from coming into contact with the metal surface again.
To remove rust and protect your tools, try the following steps:
- Clean – start by cleaning off any dirt or residue on the tool using a standard cleaner.
- Remove Rust – then you’ll need to use a rust remover to help break down any rust that may be present on the tool’s surface. INOX MX3 and a wire brush are the perfect combo for stripping rust away and leaving metal tools looking silver and shiny again.
- Polish – once you have removed all traces of corrosion, you can use a polishing compound to bring back the original lustre of the tool. You guessed it, INOX can help there too.
- Apply Protective Coating – once your tools are polished and clean, apply an extra layer of MX4 or MX3 for added protection against future corrosion and wear and tear.
Steps to Maintaining Your Toolshed
Keeping your toolshed in order is essential for managing your tools, and it’s the key to protecting them from rust and corrosion. If your tools are just left lying around at the mercy of the elements, then that’s a great recipe for rust. But with just a few simple steps you can keep your tools and equipment safe from rust and corrosion, so you can use them whenever you need to.
Here are some tips:
- Maintain your tools – dirt particles act like tiny abrasives when combined with moisture, which accelerates the formation of rust. If you wipe down your tools with a dry cloth after every use, that goes a long way towards preventing rust from forming.
- Keep your tools dry – water is one of the key ingredients in rusting metal, so keeping your tools dry is essential. When storing them, try to keep them away from sources of moisture such as open windows or vents in houses or garages.
- Use an anti-corrosive agent – once you’ve cleaned and dried off your tools, you can give them an extra layer of protection with INOX Multi-Use Lubricant Spray with Anti-Corrosion Technology. This spray acts as a barrier between metal surfaces and moisture to protect against oxidation and corrosion!
FAQs About Maintaining and Protecting Your Tools With INOX
Have questions about what INOX can do to protect your tools and equipment? You’re not alone. Let’s explore some of the most commonly asked questions around maintaining and protecting your tools with INOX.
Does INOX protect tools from rust?
Yes! INOX is a lubricant and corrosion-preventative coating, which doesn’t just stop existing rust, but prevents new rust and corrosion. Unlike oil, which seeps away over time, the waxy film of INOX sticks around to keep surfaces protected and in perfect condition even after months of exposure to dirt, dust and moisture.
How do I apply INOX?
It’s really easy! You just need a clean cloth or brush to apply it to the surface. Once it’s dry you can buff off any excess product with a dry cloth or brush for durable protection against rust and corrosion even in extreme temperatures.
How do I remove INOX?
To remove any layer of built-up residue, use a damp cloth or brush with a mild detergent mixed and hot water until the surface looks clean again. And that’s it!
Conclusion
Long story short, rust and corrosion are serious threats to the tools we use in our everyday lives. And while there’s no foolproof solution, INOX is an easy and effective way to protect your tools against these issues.
It forms a protective layer between metals and moisture, helping to protect tools from rust and corrosion while also improving the longevity of your tools. With a few simple steps, you can keep your tools and equipment rust-free and in top condition. With the right protection, you can make sure your tools are safe and sound—now and for years to come.