CAR & MOTORCYCLES
Starter motor, alternator, generator and solenoid shaft bushes – wiper motors and linkages – inner control cables – motorcycle clutch and accelerator cables (Ideal for classic/vintage heavy clutch cables)
COLD CLIMATE LUBRICANT
Ski bindings and snow board clips – snow mobile tracks, door hinges, locks and control cables – chair lift cables (prevents icing) – cold storage door locks and hinges, helps prevent switches, solenoid and valves icing up.
all electric motor bushes – solenoid shaft assemblies – relay and switch gear pivot point bushes.
Chain and sprocket drives – PTO splines and couplings – shearing hand pieces and equipment – control cables and linkages – winch cables – stock gate hinges and latches.
Pin bearings, bushes, screw & worm drives – slides & small linear bearings.
Model train engine bushes and gears, rolling stock wheels and track switching points – all moving parts for model sailing and power boats, model cars, slot cars and tracks and model planes
INDUSTRIAL & MINING
Electric and pneumatic power tools – punching, stamping and folding equipment – conveyor and pneumatic systems lubricators – cutting, drilling and thread tapping – release agent (ie plastics, metal, etc) – factory roller doors – underground pump motor bushes.
MARINE & SHIPPING
Sail tracks – door hinges and locks – sliding hatches and pulleys – control cables – winch cables – high speed sail and line winders – sea container hinges and latches
All firearms – roller blades and skate boards – gym and sporting equipment – mountain and racing pushbike chains, cables and wheel bearing hubs
TRUCK, BUS & TRAILER
Pneumatic door tracks and linkages – side curtain tracks alloy/stainless steel roller doors and tracks – air brake slack adjusters – inner control cables all starter motors, generators, alternators and wiper motors and all linkages, door hinges stock crate hinges and latches
And any other application where an extreme pressure anti-corrosion liquid lubricant is required.
WHAT DOES NSF APPROVED MEAN?
The National Sanitation Foundation (NSF) is an independent, non-profit making organisation. The NSF H1 standard is globally accepted as confirming the food grade lubricant is safe for use in applications where incidental food contact may occur.
H1 – Acceptable for use where there is incidental food contact.
H2 – Acceptable for use where there is no possibility of food contact.
H3 – Acceptable for use as a soluble oil
HT1 – Acceptable for use as a heat transfer fluid where this is possibility of incidental food contact
3H – Acceptable for use as a release agent on hard surface in direct contact with meat and poultry
WHY WOULD I USE INOX-MX5 PLUS OVER INOX-MX3?
INOX-MX5 Plus is an extreme pressure lubricant, which means it will lubricate better under high loads. INOX-MX5 Plus can take loads nearly as high as some greases on the market today.
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof. For any other statements or certifications, please email us at email@example.com or call us on +61 7 3209 8733
FOOD GRADE APPROVED: Australia (Type ‘A’ ) Instrument of Approval is freely available on request from Candan Industries P/L.
KOSHER CERTIFICATE: K-ID DZH-PBQH Status: Pavere
Copies of the Food Grade Approval & Kosher Certificate can be down loaded from the download site at the bottom of the SDS page.
|ASTM 1298||DENSITY @15.6°C||.865|
|ASTM D97||POUR POINT||-13°C|
|ASTM D92||FIRE POINT||204°C|
|ASTM D1744||KARL FISHER WATER||254.4 ppm|
|ASTM D445||VISCOSITY @ 40°C||10.86cst|
|VISCOSITY @ 100°C||2.74cst|
|ASTM D2509||TIMKEN, OK LOAD||20kg|
|ASTM D2782||TIMKEN TEST – OIL||1.4kg|
|ASTM IP239||4 BALL WELD TEST||275kgf|
|ASTM D4172||4 BALL WEAR SCAR 1200rpm, 40kg, 75°C, 1h||0.89mm|