Food, Beverage 7 Meat

Use INOX-MX3 FG for protection against corrosion.

Use INOX-MX5 for lubrication of all chains, sprockets, meat hooks, wet area relays, solenoids, switches and light fittings, motors and fans in cold rooms and freezers, taps, valves and pipe threads.

Use INOX-MX6 grease for all conveyor bearings and bushes.

Spray INOX-MX3 FG on the outside of bone, waste meat and seafood bins and waste food compactors to stop any spread of fly maggots.

Use INOX-MX6 grease for food and beverage bottling and canning conveyor line bearings, bushes and rollers.

Use INOX-MX3 FG for protectiom from corrosion and moisture in switches, relays, solenoids, electrical plugs, sockets and junction boxes on hot water heaters and cookers.

Use INOX-MX3 FG to protect field windings, armatures, circuits, solenoids, switches. Use INOX-MX5 to lubricate splines and couplings.

Use INOX-MX6 grease to lubricate bearings and bushes for all pump and drive motors. INOX-MX3FG, MX5 and MX6 are all NSF Listed H1

Use INOX-MX6 EP No-melt grease for oven door hinges and latches, conveyer oven chains, sprocket bearings and bushes, plantetary and straight mesh gears on food mixers, pastry roller gears and bushes, all food equipment and machinery bearings and bushes.

For overall protection from corrosion and moisture on all food, beverage and abattoir processing and manufacturing machinery, equipment and parts, use INOX-MX3 FG or LANOX-MX4 Grease.

Clothing & Textiles

INOX-MX5 is an Extreme pressure, fine textured, non-staining lubricant that can safely be used on all pin and roller bearings, bushes, high speed spindles, shafts, gears, pivots and hinges for sewing machines, overlockers, electric scissors, spinning wheels and weaving looms. Also stops moisture and corrosion problems.

Aluminium & Sheet Metal

INOX-MX3 and LANOX-MX4 are considered the best cutting lubricants for stopping tool chatter, furring and burring and other problems that are encountered when working aluminium. Use INOX-MX3 for cutting and milling, LANOX-MX4 for drilling and tapping. Saw blades and drills will work exceptionally cooler with these products, giving them longer tool life and stay sharper longer between re-sharpenings.

INOX-MX3 is widely used by the aluminium industry in the manufacture of garage doors, insect and security screens, sliding doors, retail and shop front fittings.

Use INOX-MX3 to lubricate and protect against corrosion, locks, hinges, door rollers and tracks.

INOX-MX3 makes it easier to remove corrosion from aluminium.

INOX-MX3 lubricant will improve performance when used on sheet metal seam folding and edging machines.

INOX-MX3 will make cutting easier on sheet metal shearing machines and guillotines.

INOX-MX3 keeps machinery and equipment cleaner and corrosion free.

Use INOX-MX5 to lubricate bushes, shafts and spindles.

Timber & Sawmills

Use INOX-MX3 to protect circular and band saw blades after sharpening until they are used or are stored between use for long periods from corrosion.

INOX-MX3 and LANOX-MX4 will clean and protect log bed carrier and bench feed bearings from corrosion caused by timber resins.

Use INOX-MX8 grease to lubricate saw bearings and shafts, log bed carrier and bench feed bearings,

INOX-MX3 lubricant is a good self oiling lubricant for chain saws, keeps the chain and bar free of corrosion and stops the build up of timber resins.

Pneumatic Control Systems

INOX-MX3 and LANOX-MX4 anti-corrosion lubricants have a very wide application for all air operated and controlled equipment. They will keep moisture and corrosion out of solenoid valves, cylinders, actuators and lines.

Use INOX-MX3 and LANOX-MX4 to lubricate the total pneumatic system, it stops equipment like valves and cylinders sticking.

INOX-MX3 will free up air control equipment that is frozen with corrosion.

LANOX-MX4 can be used in automatic line lubricators.

INOX-MX3 or LANOX-MX4 will not gum up or effect neoprene seals.