MX3FG Lubricant “Food Grade”

For food & beverage processing machinery & equipment.

General Info
Applications & Uses
Common Questions
Discussion
SDS & Technical Data

INOX MX3FG Food Grade Lubricant is a multi-purpose oil based spray designed for use on food processing and handling equipment. Spraying on surfaces creates an anti-rust film to protect from any corrosion or moisture that can occur. It penetrates between moving parts to eliminate any binding or sticking, while keeping them well lubricated.

INOX MX3FG was released to cater specifically for the food and beverage industry. INOX-MX3FG holds the NSF, class H1 food grade approval which is the highest approval available for incidental contact with food for lubricants. As a result, this lubricant is recognised worldwide and therefore allows INOX-MX3FG to be used in all food applications all over the world.

INOX-MX3FG is similar to the original formula with some changes to comply with the NSF H1 criteria. INOX-MX3FG has undergone stringent testing and stands strong among the other INOX products and even stronger with its competitors.

Available Sizes:

60ml Needle Injector Bottle
300g Aerosol
5, 20 & 205 Litre Container – 500ml spray bottle comes with each

Displaces, penetrates, lubricates and protects
Contains no silicon, acid, kerosene, dieselene or toxic compounds
Will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals
Doesn’t dry out, gum up, become gooey or sticky or wash off with water
Non-toxic, non-static, non-corrosive non-conductive and non-staining
Odourless, no dye or masking agents added

There are over 1001 uses for INOX MX3. So there is 1002 uses for MX3FG as it can have incidental contact with food.

WHAT DOES NSF APPROVED MEAN?

The National Sanitation Foundation (NSF) is an independent, non-profit making organisation. The NSF H1 standard is globally accepted as confirming the food grade lubricant is safe for use in applications where incidental food contact may occur.

H1 – Acceptable for use where there is incidental food contact.
H2 – Acceptable for use where there is no possibility of food contact.
H3 – Acceptable for use as a soluble oil
HT1 – Acceptable for use as a heat transfer fluid where this is possibility of incidental food contact
3H – Acceptable for use as a release agent on hard surface in direct contact with meat and poultry

CAN INOX-MX3FG COME IN CONTACT WITH FOOD?

Yes, the NSF H1 approval allows “incidental contact with food”.

IS THE INOX-MX3FG THE SAME AS THE ORIGINAL FORMULA?

No, the formula is similar but needs to be different to comply with the NSF guideline’s.

11 comments on “MX3FG Lubricant “Food Grade””

Jefri on March 31st, 2021 - 9:26pm

hi, i just wondering if MX3 Food Grade is possible to use on hot surface up to 500 Fahrenheit? thank you

Reply
- ashley milton on April 6th, 2021 - 9:51am
  
  Hi Jefri,
  
  Thanks for the enquiry.
  
  The INOX MX3 Food Grade has a flash point of around 200 degrees celsius making it not suitable for this application. I am sorry we don’t have any thing in our range that I can recommend.
  
  Regards, INOX Team.
Paul Joseph on June 25th, 2021 - 1:28pm

Our company is currently being audit for BRC Standard and the auditor is requesting a allergen statement.
Could you please forward ASAP.

Reply
- Suzanne Thomas on July 5th, 2021 - 10:40am
  
  Good Morning Paul
  We have emailed this directly to you
  Regards The INOX Team
Peter on September 19th, 2021 - 10:12am

What product would you suggest to lubricate a lever espresso machine? It’s required for sliding and hinged parts that are always hot (not too hot) and obviously food grade

Reply
- Suzanne Thomas on December 7th, 2021 - 12:06pm
  
  MX6 no melt food grade grease
Lei on September 29th, 2021 - 3:52pm

Our company is currently being audit for SQFStandard and the auditor is requesting a allergen statement.
Could you please forward ASAP?

Reply
- Suzanne Thomas on December 7th, 2021 - 12:05pm
  
  please email us at info@inoxmx.com for a copy thank you
- Suzanne Thomas on December 7th, 2021 - 12:14pm
  
  I have emailed this to you
Evan Laminero on May 31st, 2022 - 6:03pm

Hi Inox Team,

Can I also ask for a copy of an Allergen Statement for Inox lubricants?

Thanks,

Evan

Reply
- Suzanne Thomas on June 1st, 2022 - 1:32pm
  
  I have emailed this to you regards the inox team

SDS Downloads

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof. For any other statements or certifications, please email us at info@inoxmx.com or call us on +61 7 3209 8733

ASTM 1298	DENSITY @15.6°C	.852
ASTM D97	POUR POINT	-13°C
ASTM D92	FIRE POINT	204°C
DIELECTRIC		> 40
ASTM D1744	KARL FISHER WATER	273.2 ppm
ASTM D445	VISCOSITY @ 40°C	10.04
	VISCOSITY @ 100°C	2.54

Material Safety Data

Safety data sheets are updated frequently. Please ensure that you have a current copy.

The Material Safety Data Sheets for INOX MX3FG can be downloaded and viewed or printed from this page.

Commercial

Applications & Uses

Domestic

Applications & Uses

Fishing

Applications & Uses

Electrical

Applications & Uses

View All Applications & Uses

Store Locator

Inox products are available all over Australia and many countries throughout the world, use our search tool to find a retailer near you.

Find a store

Distributors

See all of the Inox Master Distributors around the world.

View Distributors

MX3FG Lubricant “Food Grade”

For food & beverage processing machinery & equipment.

Available Sizes:

WHAT DOES NSF APPROVED MEAN?

CAN INOX-MX3FG COME IN CONTACT WITH FOOD?

IS THE INOX-MX3FG THE SAME AS THE ORIGINAL FORMULA?

11 comments on “MX3FG Lubricant “Food Grade””

Leave a Reply Cancel reply

SDS Downloads

Material Safety Data

Commercial

Applications & Uses

Domestic

Applications & Uses

Fishing

Applications & Uses

Electrical

Applications & Uses

Store Locator

Distributors

Subscribe to our email newsletter