ANCHORS, CHAINS & SHACKLE BOLTS
For good protection against corrosion and helps helps reduce fouling. Anchor chains and shackles. Drum cables and net chains on trawlers and fishing boats.
Keeps corrosion and moisture out of chains and open gears on mixers, agitators and helicopter finishers.
CONSTRUCTION & FABRICATION
Protects bare metal surfaces, frame work in the open air from corrosion during construction before painting – Also good for the protection of all unpainted metal held in storage.
EARTH MOVING MACHINERY
Use as an anti-seize on track and blade bolts and nuts before screwing together – Protects all blades and bare metal surfaces between use.
Protects all painted and bare mental surfaces, sprockets, chains and cables, PTO splines and couplings from corrosion on all tractors, harvesters (grain, sugar, grape, etc), sowers, vegetable diggers and washers in use and in the off season.
IRRIGATION PLANT & PIPES
Keeps pipe threads, chains, cables, linkages and couplings clean and free from corrosion and lubricated while in use and when in storage.
JET SKIS & OUTBOARDS
Protects outboards, clamps, props and jet skis from salt water corrosion, will not harm or harden rubber fittings – Keeps control and steering cables and linkages in good working order and corrosion free.
Apply to all livestock crates and gates (rail , road, etc) to protect from rust and chemical corrosion before transit or in storage.
Protects all bare metal surfaces, pump motors (above and below ground), drag lines, chains and winches from moisture and corrosion in adverse climatic conditions.
MOORINGS & SLIPS
Stops electrolysis – Keeps winches, cables, slip cradles and wheel bushes lubricated and corrosion free.
Protects all painted and bare metal surfaces in the open from moisture and corrosion – Protects all timber surfaces for water and dry rot ( may slighty darken bare timber but it will not harm it) – Waterproofs and protects leather harness’s, boots, etc. Protects Firearms, barrels, etc in long term storage, will not harm stocks or metal finishes.
RUBBER & NEOPRENE
Protects and lubricates rubber and neoprene hoses, seals, bushes and O rings,
Boat, box and car trailers and horsefloats, coat on chassis, springs, axles, hinges, couplings, winches and cables for protection from sea air and salt water corrosion.
Apply to all metal threads before joining, stops threads from corroding together, makes it easier to undo all joints, nuts, bolts and screws at a later date.
Metal to metal soft seal gasket.
WIRE ROPE & CHAINS
Lubricates and protects chains and wire rope from corrosion.
WHAT DOES NSF APPROVED MEAN?
The National Sanitation Foundation (NSF) is an independent, non-profit making organisation. The NSF H1 standard is globally accepted as confirming the food grade lubricant is safe for use in applications where incidental food contact may occur.
H1 – Acceptable for use where there is incidental food contact.
H2 – Acceptable for use where there is no possibility of food contact.
H3 – Acceptable for use as a soluble oil
HT1 – Acceptable for use as a heat transfer fluid where this is possibility of incidental food contact
3H – Acceptable for use as a release agent on hard surface in direct contact with meat and poultry
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof. For any other statements or certifications, please email us at firstname.lastname@example.org or call us on +61 7 3209 8733
FOOD GRADE APPROVED:
NSF H1 – Certified – Incidental contact allowed (Internationally and USA recognized food grade approval)
Australia (Type ‘A’ ) Instrument of Approval is freely available on request from Candan Industries P/L.
KOSHER CERTIFICATE: K-ID HTH-BBQK Status: Pavere
Copies of the Food Grade Approval & Kosher Certificate can be down loaded from the download site at the bottom of the SDS page.
|Appearance||Pale creamy tan solid. Has minimal lanolin odour|
|Melting Point||48 °C|
|Flash Point||162 °C|
|Solubility in Water||Insoluble|