November 4th, 2026

Every home has one: the drawer you have to wrestle open, the wardrobe door that shudders along its track, the louvre that won’t quite close. The best fix starts with a quick clean and inspection. Once the hardware checks out, a slick, non-tacky lubricant like INOX MX5 Plus PTFE Lubricant can help suitable sliding parts move smoothly again.

How to Lubricate Sticky Drawers and Sliding Wardrobe Doors with INOX MX5

Quick answer: After cleaning the runners and checking the hardware, a light application of INOX MX5 Plus PTFE Lubricant can help suitable metal drawer runners, roller axles and wardrobe door tracks move smoothly. Check louvre and shower screen makers’ instructions first, keep the lubricant off glass and seals, and repair worn rollers or bent tracks instead of lubricating them.

At a glance Detail
Best for Metal drawer runners, roller axles, slides and sliding door tracks where the hardware maker allows lubrication
Product type Liquid PTFE lubricant that is non-tacky and needs no curing time
Do not use on Glass, seals, or louvre and shower screen mechanisms whose makers advise against lubricating
First step Vacuum grit from runners and tracks, wipe them clean and check the rollers turn freely
Key limitation Cannot fix worn rollers, bent tracks or loose fixings

Why does a PTFE lubricant suit household sliding parts?

INOX MX5 Plus PTFE Lubricant is built on INOX’s food grade INOX MX3FG formula with added PTFE (polytetrafluoroethylene), a friction modifier that makes contact surfaces super slick. Unlike heavier greases, it won’t turn tacky, dry out or wash off with water, so it doesn’t build up into the gummy residue that traps dust in tracks and runners.

It’s also gentle on the surfaces around the job. INOX MX5 Plus PTFE Lubricant won’t harm metal, fibreglass, laminate, painted or enamel finishes, most plastics or neoprene seals, and it’s non-staining. INOX MX5 Plus PTFE Lubricant is also NSF H1 registered for incidental food contact.

How do you free up sticky drawers and sliding wardrobe doors?

Clean the drawer or wardrobe door runners first, then lubricate only the parts that move. Vacuum grit out of runners and tracks, wipe them down and check that the rollers turn freely. A scraping door or a damaged roller needs adjustment or repair before anything else, as our guide to maintaining sliding doors and windows explains.

With the hardware sound, a light application of INOX MX5 Plus PTFE Lubricant on metal runners, roller axles and slides helps keep them gliding. INOX MX5 Plus PTFE Lubricant also suits small linear bearings and roller door tracks. The 30 ml needle injector bottle puts the lubricant exactly where it’s needed, without overspray on timber or fabric.

Can you lubricate louvres and shower screens?

Check the manufacturer’s instructions before lubricating louvre windows or shower screens. Some louvre manufacturers pre-lubricate the mechanism and advise against adding more, so check the maker’s instructions first. If yours fall into that group, clean the blades and clips and contact the supplier rather than spraying inside.

Shower screens are similar. INOX MX5 Plus PTFE Lubricant can suit exposed metal rollers and pivots where the screen maker allows lubrication, but keep it to the hardware, not the glass or seals. Long-term, continual use may affect some natural rubber products.

How do you apply INOX MX5 Plus PTFE Lubricant, and when is lubricant not the fix?

Apply INOX MX5 Plus PTFE Lubricant sparingly to clean, dry contact points, work the drawer or door back and forth a few times to spread it, and wipe off any excess. Because it’s a liquid rather than a dry film, there’s no curing time, so the job is done once it’s wiped down.

Lubricant does have limits, though. Worn rollers, bent tracks and loose fixings are mechanical problems that need adjusting or replacing. Fix the hardware first, then lubricate it.

Frequently asked questions

What is the difference between INOX MX5 Plus PTFE Lubricant and INOX MX3 Lubricant?

INOX MX5 Plus builds on the INOX MX3FG formula by adding PTFE, which makes it an extreme pressure liquid lubricant for heavier loads and constant friction. INOX MX3 Lubricant remains INOX’s everyday penetrant and general-purpose lubricant.

Is a PTFE liquid the same as a dry-film lubricant?

No. INOX MX5 Plus PTFE Lubricant is a liquid that stays wet on the surface and needs no curing time. INOX MX12 PTFE Supa Glide is a dry-film lubricant that dries to a hard PTFE film, which suits light-load sliding parts where a wet film would attract dust.

Where to buy INOX MX5 Plus PTFE Lubricant

A few minutes of cleaning and a drop of the right lubricant can save a lot of daily frustration. Pick up INOX MX5 Plus PTFE Lubricant from your nearest stockist, and check your hardware manufacturer’s guidance before you start.

Sources and technical data