November 3rd, 2026
It’s always the last bolt. The job’s nearly done, you lean on the spanner and nothing moves. Lean harder and you risk rounding the head or snapping it off, turning a ten-minute task into an afternoon with an extractor. The better approach is a good penetrant and a bit of patience, and that’s where INOX MX3 Lubricant earns its place in the toolbox.
Quick answer: To free a seized bolt, clean away loose rust, spray a penetrating lubricant such as INOX MX3 Lubricant at the thread line and let it work before you apply force. Our workshop guide recommends at least 20 to 30 minutes, or overnight if the bolt is badly corroded. Replace damaged fasteners and check torque specifications before refitting.

| At a glance | Detail |
| Best for | Seized or rusted nuts, bolts and pins |
| Product type | Penetrating lubricant with a white-oil base |
| Do not use on | Direct food-contact surfaces (use INOX MX3FG Food Grade Lubricant instead), or natural rubber with long-term contact |
| First step | Remove loose rust and spray at the thread line |
| Key limitation | Needs time to work, and cannot repair stretched, cracked or damaged fasteners |
Why do bolts seize, and how does a penetrant free them?
Most bolts seize because moisture gets into the threads and rust locks the two surfaces together. A penetrant works by creeping into those tight gaps and loosening the bond so the fastener can turn again.
INOX MX3 Lubricant is built for exactly this. It’s designed to penetrate rusted nuts, bolts and pins and help free them without causing damage, and it suits everything from wheel nuts and track bolts to exhaust manifolds and drive couplings on farm and earthmoving machinery. Unlike solvent-based sprays that evaporate quickly, its high-grade white oil base lasts longer, so it keeps working in the joint while you wait.
How do you free a seized bolt with INOX MX3 Lubricant?
To free a seized bolt, clean it, soak it and let the penetrant do the work before you apply force. Start by wire-brushing loose rust and dirt from around the head and the exposed thread, so the penetrant can reach the point where the bolt enters the nut or casting.
Spray INOX MX3 Lubricant directly at that thread line, not just the head. If there’s a nut, treat both sides. Then walk away and let it soak.
When you come back, try the spanner with steady pressure, working the bolt back and forth rather than forcing it in one direction. If it still won’t shift, reapply and give it more time.
How long should you leave INOX MX3 Lubricant on a seized bolt?
Give INOX MX3 Lubricant at least 20 to 30 minutes on a standard seized bolt, and leave it overnight on anything badly corroded, before reaching for heat or an impact gun. That’s the recommendation in our chassis and suspension workshop guide, which calls rushing this step, rather than the corrosion itself, the leading cause of snapped fasteners.
Plan around the wait: spray the worst bolts first, get on with the rest of the job and come back to them once INOX MX3 Lubricant has had time to soak in.
How do you stop a freed bolt seizing again?
Once the bolt is out, clean the threads, check for stretching or cracking, and replace any fastener that’s damaged. Once it’s refitted and torqued up, a coat of LANOX MX4 Lanolin Lubricant on the outside leaves a water-resistant film that helps keep moisture out, so it’s less likely to seize again, especially on trailers and gear exposed to salt air.
Two things are worth checking before you refit. Some fasteners are specified for dry torque, and lubricating the thread changes the clamping force you achieve, so confirm the service data first. And on steel bolts in aluminium parts, use an aluminium or nickel-based anti-seize rather than copper, which can speed up corrosion of the aluminium.

Frequently asked questions
What is the difference between INOX MX3 Lubricant and LANOX MX4?
INOX MX3 Lubricant is the penetrating, everyday lubricant for freeing stuck parts and displacing moisture. LANOX MX4 Lanolin Lubricant is lanolin-based and suited to longer-lasting external corrosion protection. Our guide to INOX MX3 vs LANOX MX4 compares the two.
Is a penetrant the same as an anti-seize?
No. INOX MX3 Lubricant frees a bolt that has already seized. An anti-seize such as LANOX MX4G Lanolin Grease is applied to clean threads at refitting to help stop the bolt seizing again.
Where to buy INOX MX3 Lubricant
Seized bolts turn up on every job, from the ute to the mower to the boat trailer. Keep a can of INOX MX3 Lubricant in the toolbox, give it time to work, and the stubborn ones become a lot less stressful. Find your nearest stockist to pick one up.
