October 27th, 2025
Every minute your conveyor belt runs, thousands of metal components work in harmony – chains articulating, bearings rotating, rollers spinning. Get the lubrication wrong and this harmony becomes expensive chaos. Get it right with INOX and you’ll see why so many Australian industries have trusted us for decades to provide superior options to keep their operations moving.
INOX has a solution for all your conveyor needs:
INOX MX5 Plus PTFE Lubricant – Penetrating chain lubricant for all chain types
INOX MX8 Extreme Pressure Grease – Heavy-duty industrial grease for extreme loads
INOX MX3FG Food Grade Lubricant – NSF H1 certified food-grade spray for incidental food contact
INOX MX6 Food Grade Grease – Food-grade grease safe for rubber seals (-30°C to 300°C)
Why Your Conveyor Belt Needs More Than Just Any Lubricant
A single bearing in your conveyor system might rotate hundreds of thousands of times in a day. Without proper lubrication, metal grinds against metal, temperatures soar and what should last years, fails in months. But here’s what many operators don’t realise – not all lubricants are created equal, and using the wrong one can be just as damaging as using none at all.
The INOX difference starts with understanding that modern conveyor systems demand modern solutions. Gone are the days of a one-size-fits-all approach. Today’s operations need targeted lubrication strategies that match their specific challenges.
Breaking Down Your Conveyor’s Lubrication Needs
Conveyor Chain Lubrication
Your conveyor’s chains are its lifeline. Whether you’re running precision roller chains in your packaging line or heavy-duty welded steel chains in mining applications, these components face relentless stress. Each link, each pin, each bushing – all require protection from wear while maintaining flexibility.
Enter INOX MX5 – our penetrating lubricant with PTFE that reaches deep into chain assemblies. Unlike conventional oils that sit on the surface, INOX MX5 works its way into the critical wear points where protection matters most. Its balanced viscosity means it flows where needed, yet stays put under pressure, delivering consistent protection shift after shift.
Bearing Protection That Goes The Distance
Bearings carry the load – literally. They support your entire conveyor system while spinning at high speeds, generating heat and facing constant pressure. Standard greases often can’t handle these extremes, breaking down when you need them most.
INOX MX8 changes the game for industrial applications. This lithium complex grease doesn’t just lubricate – it fortifies. Engineered to maintain its structure under crushing loads and temperature swings, INOX MX8 creates a protective barrier that laughs at pressure. From -20°C freezer applications to scorching summer warehouses, it maintains its protective properties when others fail. These characteristics make INOX MX8 a workhorse for conveyor belts in demanding industries such as manufacturing, mining, agriculture and more.
The secret? Advanced additives that provide:
- Exceptional shear stability under load
- Superior adhesion to metal surfaces
- Outstanding water resistance
- Extended relubrication intervals that slash maintenance time
Food Processing Conveyor Belt Grease & Lubricant: When Food Safety Meets Performance
Food and beverage operations face a unique challenge: maintaining peak performance while ensuring absolute safety. One wrong lubricant choice could mean contamination, recalls and a damaged reputation.
INOX MX3FG was born from this challenge. Holding NSF H1 certification, the gold standard for food-grade lubricants, it delivers uncompromising performance with complete peace of mind. INOX MX3FG is the ideal choice for lubricating and protecting conveyor bearings and bushes alongside electrical systems in machines that have the potential to come into contact with consumables.
This multi-purpose spray doesn’t just meet standards; it exceeds expectations, providing:
- Anti-corrosion protection in wet environments
- Smooth operation of moving parts
- Complete food safety compliance for incidental food contact
- Global recognition for international operations
INOX MX3FG can be used on chains, sprockets, rollers, bearings, gears and other moving components within a conveyor system.
For grease applications in food environments, INOX MX6 delivers superior performance. Built on synthetic PAO base oils with organo-clay thickener, this advanced formulation outperforms traditional food-grade greases. The inclusion of PTFE (Polytetrafluoroethylene) creates an ultra-low friction environment that extends component life while maintaining absolute food safety.
What makes INOX MX6 special? It’s completely safe on rubber seals and O-rings – critical for food machinery where seal integrity means everything. From -30°C cold storage to high-temperature processing (with a dropping point of 300°C), INOX MX6 keeps your operation moving safely.
Important: If not already using a clay bentone based grease, clean old grease completely before reapplication, as mixing different grease types can cause compatibility issues and reduce effectiveness.
INOX MX6 excels across all critical conveyor components where grease lubrication is required. Apply it to all bearings, bushes and universal joints throughout your conveyor system to ensure smooth, reliable operation. The grease’s exceptional temperature range and seal compatibility make it particularly effective on high-load pivot points, chain tensioners and adjustment mechanisms that experience constant movement. Its water-resistant properties also provide superior protection on components exposed to washdown procedures, maintaining lubrication integrity even in the harshest food processing environments.
Extreme Heat? No Problem
Conveyor ovens, heat treatment lines and high-temperature processing throw unique challenges for lubricants. Most greases simply melt away, leaving components vulnerable exactly when protection is most critical.
INOX MX6 stands up to the heat. This no-melt formulation maintains its protective properties at temperatures that would destroy conventional greases. Oven door hinges, high-temp conveyor chains, heat-exposed bearings – INOX MX6 keeps them all protected and operating smoothly.
The INOX Application Method: Precision Meets Practicality
Smart Manual Application
Forget the “spray and pray” approach. Effective lubrication requires strategy:
For Chains:
- Target the pin-bushing interface – this is where wear happens
- Apply INOX MX5 or INOX MX3FG to the inside of the chain while slowly rotating
- Allow penetration time before operation
- Focus on the slack side where gravity assists distribution
For Bearings With Grease Zerks:
- Clean the fitting first – contamination is the enemy
- Connect your grease gun squarely to avoid side-loading
- Pump slowly while watching for fresh grease at the seals
- Stop immediately when clean grease appears
- Never assume more is better – over-greasing damages seals
For Open Bearings & Rollers:
- Clean accessible surfaces before application
- Apply appropriate INOX product sparingly but thoroughly
- Rotate components manually to distribute lubricant
- Check for smooth, quiet operation
When To Reapply
A well-organised lubrication system ensures your machinery continues to run as intended and reduces wear and tear that happens when lubricants wear off or dry out. Instead of treating lubrication as an occasional task, it should be built into a preventative maintenance schedule.
Bearings, chains, rollers and other moving components may require lubrication at different intervals – weekly, monthly or quarterly – depending on their role and the operating conditions. Following a structured schedule ensures smoother operation, reduces wear and helps extend the overall life of the conveyor system.
Watch for these signs that lubrication is needed:
- Increased operating noise
- Higher motor amperage draw
- Visible wear patterns
- Temperature increases at bearings
- Slower than normal operation
Special Considerations For Different Industries
Beverage Bottling Lines
High-speed operation and wet conditions demand lubricants that won’t wash away. INOX MX3FG’s tenacious formula maintains protection through washdowns while ensuring product safety. Apply to guide rails, star wheels and transfer points where bottles contact equipment.
Meat Processing Facilities
Temperature extremes from blast freezers to cooking operations require versatile solutions. Use INOX MX6 in freezer bearings – its -30°C low-temperature performance ensures smooth operation. INOX MX6 can withstand extremely high temperatures, making it perfect for external oven conveyor chains.
Important: If not already using a clay bentone based grease, clean old grease completely before reapplication, as mixing different grease types can cause compatibility issues and reduce effectiveness.
Distribution Centres
24/7 operation means maintenance windows are precious. INOX MX8’s extended service life means fewer interruptions. Apply to sortation system bearings, accumulation conveyor chains and transfer bearings for maximum uptime.
Manufacturing Plants
Precision and reliability drive productivity. INOX MX5 on assembly line chains ensures consistent speed and positioning. INOX MX8 on support bearings handles varying loads as products move through production stages.
Advanced Tips From INOX Experts
Temperature Matters: Apply lubricants when equipment is warm but not hot. The slight warmth helps lubricants flow into tight spaces while avoiding thermal shock.
Sequence Your Lubrication: Start with chains, then bearings, then accessible points. This prevents cross-contamination and ensures critical components get fresh lubricant.
Listen To Your Equipment: Experienced operators can hear when lubrication is needed. That slight change in pitch or rhythm often precedes visible problems.
Document Unusual Findings: Black grease expelled from bearings? Unusual wear patterns? These clues help predict failures before they happen.
Consider Environmental Factors: Humidity, temperature swings and airborne contaminants all affect lubrication needs. Adjust your program seasonally if needed.
Making The Switch To INOX
Transitioning from your current lubricants to INOX doesn’t require a complete shutdown. Start with your most problematic equipment – those bearings that always fail, those chains that constantly bind. Document the improvements, then expand the program.
Many operations that have switched have reported seeing immediate improvements:
- Quieter operation within days
- Reduced amperage draw within a week
- Extended component life within months
- Significant cost savings within a quarter
The INOX Difference
We don’t just sell lubricants, we deliver reliability. Every INOX product represents decades of Australian industrial experience, formulated for real-world conditions and backed by technical support that understands your challenges.
Whether you’re keeping food safe with INOX MX3FG and INOX MX6 or conquering industrial demands with INOX MX8 and INOX MX5, INOX has you covered.
Important Note: The information provided in this blog is for general guidance only. Before switching to INOX lubricants, always consult your equipment manufacturer’s user manual and specifications to ensure compatibility with your specific conveyor system. Operating conditions, warranty requirements, and OEM recommendations vary between equipment types and manufacturers. While INOX products are designed for wide compatibility, verifying suitability for your particular application remains your responsibility. For equipment under warranty, confirm that changing lubricants will not affect your coverage. When in doubt, consult with your equipment manufacturer and INOX for application-specific advice.