November 3rd, 2026

Motorbike brakes and chains collect a nasty mix of oil, grease, brake dust and road grime. Left alone, the grime attracts more dirt and can affect how the brakes feel. The fix is to clean first and lubricate second, using the right product for each job. For the cleaning step, INOX MX11 Chain & Brake Cleaner is designed for exactly this.

Quick answer: On a motorbike, let the brakes cool, then spray INOX MX11 Chain & Brake Cleaner onto bare-metal rotors or chain links, let it work briefly and wipe clean. Keep the cleaner off paint, plastic, rubber and Perspex, and take care on O-ring and X-ring chains. Pads soaked with oil or brake fluid need replacement.

At a glance Detail
Best for Bare-metal motorbike brake rotors, accessible calliper surfaces and chains
Product type Fast-acting, solvent-based degreaser
Do not use on Painted tank or bodywork, plastic fairings, rubber or Perspex, and avoid soaking O-ring or X-ring chains
First step Let the brakes cool and inspect for cracks, unusual wear or leaks
Key limitation Cannot restore pads soaked with oil, grease or brake fluid

What does INOX MX11 Chain & Brake Cleaner remove, and what should you protect on a motorbike?

INOX MX11 Chain & Brake Cleaner is a fast-acting, solvent-based degreaser that removes brake fluid, oil, grease and greasy dirt from motorbike chains and brake assemblies, so most cleaning jobs can be done without taking parts off the bike. Sprayed on, given a moment to work and wiped off, it’s designed to leave bare metal clean and ready for lubrication.

INOX MX11 Chain & Brake Cleaner is for bare metal only. Because it’s a strong solvent, keep it off the painted tank and bodywork, plastic fairings and other plastic surfaces. Avoid direct contact with rubber and Perspex, such as a windscreen, and prolonged contact with neoprene and plastics, and always use it in a well-ventilated area.

How do you clean motorbike brake rotors and callipers properly?

To clean motorbike brake rotors, let them cool, inspect them, then apply INOX MX11 Chain & Brake Cleaner in a controlled way. Check for cracks, unusual wear or fluid leaks first, because those need repair, not cleaning. Spray the cleaner onto the friction faces, let it work for a moment, then wipe with a clean, lint-free cloth and repeat if contamination remains.

For caked-on deposits, use a second application and a firm, non-metallic brush. Make sure the surface is clean and dry, and check the brakes work properly before riding.

Callipers need a more targeted approach, since they contain rubber boots and seals and are often painted. Clean only the accessible bare-metal surfaces, keep the cleaner off boots, seals and painted areas, and leave piston and seal servicing to the manufacturer’s procedure.

How do you clean a motorbike chain, then lubricate it?

Before cleaning a motorbike chain, identify what type it is. Many motorbike chains use rubber O-rings or X-rings, so check the chain maker’s cleaning requirements before using any solvent on a sealed chain. Use INOX MX11 Chain & Brake Cleaner carefully on these chains: spray the links and rollers rather than the O-rings, keep contact brief and avoid soaking.

On compatible chains, with the bike secure on a stand, the engine off and the wheel turned by hand, apply the cleaner to strip old grease and grime, brush any stubborn deposits, wipe the chain down and make sure it’s dry before lubricating.

A clean chain then needs fresh lubrication. INOX MX9 ‘No Chukka’ Chain Lube combines PTFE with tackifiers to help it stay on the chain, and it’s safe on motorbike O-ring and X-ring chains. Apply it to the links and rollers rather than directly onto the O-rings, and keep it well away from rotors and pads.

When is cleaning not enough?

Cleaning a motorbike rotor isn’t the same as restoring contaminated pads. If oil, grease or brake fluid has soaked into the friction material, follow the brake manufacturer’s inspection and replacement advice. The same goes for leaks, warped rotors and rusted or stiff chains: they need repair or replacement.

Frequently asked questions

Can INOX MX11 Chain & Brake Cleaner remove INOX or LANOX lubricants from a motorbike?

Yes. INOX MX11 Chain & Brake Cleaner removes INOX and LANOX lubricant products cleanly, which makes it the recommended step before reapplying fresh lubricant.

Which chain lube follows INOX MX11 on a motorbike?

INOX MX9 ‘No Chukka’ Chain Lube is the recommended follow-up for motorbike and go-kart chains, including O-ring and X-ring chains.

Which INOX product do you use at each step?

On a motorbike, clean with INOX MX11 Chain & Brake Cleaner, lubricate the chain with INOX MX9 ‘No Chukka’ Chain Lube and always follow your manufacturer’s instructions. Find INOX MX11 Chain & Brake Cleaner at your nearest stockist.

Sources and technical data