November 3rd, 2026

The side gate latch has been sticking for months, and when you finally take a look, the bolts holding it on are crusted with rust. Replacing them is the easy part. The smart part is protecting the new threads before they go in, so you’re not fighting the same seized bolts in a few years. That’s a job made for LANOX MX4G Lanolin Grease.

Quick answer: To help stop new gate or garden bolts seizing, clean the threads and brush a thin film of LANOX MX4G Lanolin Grease on the section that engages the nut. Check first that the hardware allows greased assembly, because grease changes clamping force at a given torque, and don’t use grease where a threadlocker is specified.

At a glance Detail
Best for Ordinary metal bolts with accessible nuts on gates, hinge brackets and garden hardware
Product type Lanolin grease used as a thread anti-seize
Do not use on Bearings, screws into timber, masonry anchors, pre-coated locking fasteners, or threads that call for a threadlocker
First step Check that the hardware allows greased assembly
Key limitation Cannot repair damaged threads, distorted brackets or worn mounting holes

How does LANOX MX4G Lanolin Grease help stop outdoor bolts seizing?

LANOX MX4G Lanolin Grease works as a thread anti-seize on outdoor bolts: applied to metal threads before joining, it helps stop them corroding together and makes the joint easier to undo later. Outdoor bolts seize when moisture gets into the threads and corrosion locks the bolt and nut together. The waterproof lanolin base resists salt and acid corrosion and helps stop electrolysis between dissimilar metals, which suits gates and garden hardware exposed to rain and coastal air.

What should you check before greasing a thread?

Two checks apply before you grease any thread. First, make sure the hardware allows lubricated assembly. Grease changes thread friction, which changes how much clamping force a given tightening torque produces, so follow the manufacturer’s instructions for greased threads rather than a dry torque figure. Second, if the fixing calls for a threadlocker, use that instead. Grease and threadlocker shouldn’t go on the same thread.

This method suits ordinary metal bolts with accessible nuts, not screws into timber, masonry anchors or pre-coated locking fasteners.

How do you replace gate latch bolts using LANOX MX4G?

To protect new gate latch bolts, clean the threads, brush on a thin film of LANOX MX4G Lanolin Grease and tighten to the hardware instructions. Start by securing the gate and noting where the latch and striker sit, so alignment is easy to restore. Remove the old bolts and inspect the joint: damaged threads, distorted brackets or worn mounting holes need repairing, because grease won’t fix them.

Clean the new bolt and nut threads and let them dry. Using a small brush, spread a thin, even film of LANOX MX4G around the section of thread that engages the nut, without leaving lumps. Keep it off the latch mechanism itself.

Start the nut carefully by hand, tighten steadily rather than with an impact driver, then wipe away any surplus, especially on timber, as lanolin grease may alter its appearance. Open and close the gate several times to check the latch engages cleanly.

Can you use LANOX MX4G on hinge brackets and metal trellises?

Yes, the same thread protection works on gate hinge mounting bolts and metal garden trellis bolts. For hinges, support and restrain the gate before loosening anything, and get help if you can’t hold it securely. Treat only the mounting bolts, not the hinge pivot. For a trellis, stabilise the frame first and never leave it standing on a loosened joint.

Frequently asked questions

What is the difference between LANOX MX4G Lanolin Grease and LANOX MX4?

LANOX MX4G is a lanolin grease, while LANOX MX4 Lanolin Lubricant is a lanolin liquid lubricant. LANOX MX4G is thicker and tackier, designed to stay in place under wash-down, vibration and long-term exposure.

Where to buy LANOX MX4G Lanolin Grease

A few minutes with a brush now saves a battle with seized bolts later. Pick up LANOX MX4G Lanolin Grease from your nearest stockist before your next outdoor repair.

Sources and technical data