November 3rd, 2026

The sky turns green-grey, the wind picks up and there’s a scramble to stack the chairs and drop the umbrella. Storm season is tough on outdoor furniture, and the damage isn’t always obvious until weeks later, when bolts start bleeding rust and folding chairs refuse to fold. A little preparation now, with LANOX MX4 Lanolin Lubricant, helps the metal parts ride it out.

Quick answer: To protect outdoor furniture hardware through storm season, wipe the metal clean and dry, then apply a light coat of LANOX MX4 Lanolin Lubricant to bolts, hinges and frames and wipe off any excess. The lanolin base doesn’t dissolve in water. Keep the lubricant off cushions, timber and natural rubber, and secure loose furniture whenever a storm is forecast.

At a glance Detail
Best for Exposed metal furniture hardware, including bolts, nuts, hinges, folding joints and frames
Product type Lanolin-based corrosion protection lubricant
Do not use on Cushions, fabrics, or natural rubber feet and caps
First step Wipe off dirt and loose rust and let the metal dry
Key limitation Reapply after heavy storms or at the end of the season, and wipe off any excess

Why is storm season so hard on outdoor furniture hardware?

Storm season is hard on outdoor furniture hardware because driving rain forces water into joints, hinges and bolt holes, and the humidity that follows keeps metal damp for days. In coastal areas, salt carried on the wind makes it worse. Steel bolts, folding mechanisms and umbrella winders are usually the first to corrode, and where steel fixings meet aluminium frames, dissimilar metals can speed up corrosion even further.

The priority when a storm is forecast is always safety: secure or store loose furniture and umbrellas so they can’t become airborne, as the Queensland Government’s Get Ready Queensland guidance advises. Protecting the hardware is what keeps everything working once the weather clears.

How does LANOX MX4 Lanolin Lubricant protect metal furniture in wet weather?

LANOX MX4 Lanolin Lubricant protects outdoor furniture hardware by leaving a lanolin-based film that doesn’t dissolve in water, helping it resist washing off through repeated downpours. Made with a high-grade oil and lanolin, it’s designed for high-humidity and marine conditions, and it’s formulated to stop electrolysis between dissimilar metals, which suits steel bolts in aluminium frames.

It lubricates as it protects, too, helping hinges, folding joints and umbrella cranks keep moving freely through the wet months. For fittings that need a heavier, stay-put coating, LANOX MX4G Lanolin Grease provides the same lanolin barrier in grease form.

How do you apply LANOX MX4 before the storms arrive?

Treat outdoor furniture on a dry day before storm season sets in: wipe dirt and loose rust from the metal, let it dry, then apply a light coat of LANOX MX4 Lanolin Lubricant to bolts, nuts, hinges, folding joints, umbrella winders and the exposed metal frame. Work any moving parts a few times and wipe off the excess, especially on armrests and anywhere people sit. Reapply after heavy storms or once the season ends.

Keep LANOX MX4 to the metal. Avoid cushions, fabrics and timber surfaces, and keep it off natural rubber feet and caps, since extended exposure may affect some natural rubber.

Frequently asked questions

What is the difference between LANOX MX4 and INOX MX3 Lubricant?

LANOX MX4 Lanolin Lubricant is lanolin-based and optimised for long-term corrosion protection, especially in harsh, wet and marine environments. INOX MX3 Lubricant is a penetrant and general-purpose lubricant that excels at freeing seized parts. Our guide to INOX MX3 vs LANOX MX4 compares the two.

Where to buy LANOX MX4 Lanolin Lubricant

A can of LANOX MX4 and half an hour on a fine afternoon can go a long way towards protecting your outdoor setting from rust. Pick up LANOX MX4 Lanolin Lubricant from your nearest stockist before the next storm rolls in.

Sources and technical data