MX8 Technical Data & MSDS

Technical Information

TEST ASTM METHOD
NLGI 2
Soap Type Lithium Complex
Colour Red
Texture Smooth & Tacky
Penetration at 25°C
Worked, 60 Strokes D.217 280 min. – 305 max
Dropping Point, °C D.2265 260+
Lower Operating Temperature °C – 20
Leakage, Wheel Bearing 65g
Packed, 163°C, g D.1263 1.5
Water Washout at 80°C, % D.1264 3.5
Oil Separation
24 hours at 25°C kPa D.1742 2
Oxidation Stability –
Pressure Drop at 100 Hour, kPa D.3336 15
Pressure Drop at 500 Hour, kPa D.3336 70
Lubrication Life, Bearing No. 204
10000 rpm, 163°C, Hours D.3336 125
Rust Prevention Rating D.1743 Pass
Timken, OK Load, Kg D.2509 26
4-Ball Weld, Kgf IP.239 575
4-Ball Wear Scar, mm D.2266 0.48
Base Oil, cSt at 40°C D.445 190

 

Safety data sheets are updated frequently. Please ensure that you have a current copy.

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

The Material Safety Data Sheets for INOX-mx2 can be downloaded and viewed or printed from this page.

MSDS Downloads