FOOD GRADE APPROVED:
Australia: Instrument of Approval is available on request.
New Zealand: NZFSA Approved C15 (All animal product except diary)
USA: NSF H1 Registered
KOSHER CERTIFICATE: K-ID FML-QVTB Status: Pavere
Copies of Food Grade Approvals, Kosher Certificate & Testimonials can be downloaded from the INOX-mx6 MSDS page. They can be faxed or posted directly to the recipient from Candan Industries P/L.
|TYPICAL TESTS||ASTM METHOD|
|Appearance||Smooth, light brown|
|Penetration at 25°C||D.217|
|Worked, 60 Strokes||265 min – 295 max|
|Dropping Point, °C||D.2265||Does not melt|
|Lower Operating Temperature °C||D.1743||– 30|
|Water Washout @ 79°C||D.1264||2.30 %|
|Rust Prevention Rating||Pass|
|Timken, OK Load, Kg||D.2509||23|
|4-Ball Weld, Kgf||IP.239||500|
|Base Oil, cSt at 40°C||D.445||46|
|Base Oil, cSt at 100°C||D.445||7.8|
Safety data sheets are updated frequently. Please ensure that you have a current copy.
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.
The Material Safety Data Sheets for INOX MX6 can be downloaded and viewed or printed from this page.