INOX MX6 is a synthetic PAO base extreme pressure grease which uses an organo clay thickener formulated to give premium performance and food grade purity. This grease is composed entirely of ingredients which meet the requirements of section 178.3570 of the US FDA regulations and have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat, meat products, or any food products.
INOX MX6 is a smooth light tan grease made from polyalphaolafins and a special bentone thickner. It contains additives to protect against corrosion and oxidation. It has a temperature range of -30 C to an extremely high temperature. The Dropping point of MX6 is >300 degrees Celsius. Operating temperatures will vary depending on application, usage times, a temp variances.
INOX MX6 is safe on rubber, and is ideally suitable for all plumbing O-rings & seals, Food machinery O-rings & seals, Pneumatic control valve O-rings & seals, Diving gear O-rings & seals, anywhere rubber or synthetic O-rings and seals are used.
Polytetrafluoroethylene (PTFE) is a premium grade anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures and extends life.
2.5 kg Tub
20 kg Drum
180 kg Drum
INOX MX6 holds the NSF, class H1 food grade approval.
INOX MX6 is a synthetic extreme pressure grease containing bentone, PTFE and polyalphaolafins.
INOX MX6 will work at high temps and has excellent resistance to water washout.
INOX MX6 is highly suitable for all bearings, bushes, chains, hinges, sprockets, slides, splines & couplings, universals and ball joints used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Freezers and Cold Rooms.
Ovens - Outside only for hinges and external parts (do not put inside oven)
Rubber and O-ring grease
INOX-mx6 is a smooth light tan grease made with polyalphaolefins and a special bentone thickener. It contains additives to protect against corrosion and oxidation.
INOX-mx6 grease is recommended for all bearings and general lubrication and where processing temperatures go well below zero, especially in the refrigerated and frozen foods and beverage industries.
INOX-mx6 grease has a temperature range of -30 °C to an extremely high temperature.
P T F E – Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication to bearings, bushes, shafts, gears, chains, splines, couplings, winches, cables, universals, CV & ball joints.
INOX-mx6 is highly suitable for all BEARINGS, BUSHES, CHAINS, HINGES, SPROCKETS, SLIDES, SPLINES & COUPLINGS, UNIVERSALS AND BALL JOINTS used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Ovens (outside oven only), Freezers and Cold Rooms.
INOX is safe on rubber, and is ideally suitable for all plumbing O-rings & seals, Food machinery O-rings & seals, Pneumatic control valve O-rings & seals, Diving gear O-rings & seals, anywhere rubber or synthetic O-rings and seals are used.
INOX-mx6 also has a wide spread application outside of the food and beverage industry. Because of it’s Extreme Pressure lubricating ability and NO MELT temperature range, INOX-mx6 is highly suitable for all bearings, bushes, universals, etc used in Bitumen Transporting and Laying Machinery, Foundries, Paint Baking Ovens and all other high temperature applications. INOX-mx6 is also highly suitable for Truck, Trailer and all Farm Machinery wheel bearings, universals & ball joints, splines & couplings, Tierod Ends, Winches and Trailer Couplings.
NB. INOX-mx6 is a premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect its performance. Before using INOX-mx6 grease, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 in a grease gun.
WHAT DOES NSF APPROVED MEAN?
The National Sanitation Foundation (NSF) is an independent, non-profit making organisation. The NSF H1 standard is globally accepted as confirming the food grade lubricant is safe for use in applications where incidental food contact may occur.
H1 – Acceptable for use where there is incidental food contact.
H2 – Acceptable for use where there is no possibility of food contact.
H3 – Acceptable for use as a soluble oil
HT1 – Acceptable for use as a heat transfer fluid where this is possibility of incidental food contact
3H – Acceptable for use as a release agent on hard surface in direct contact with meat and poultry
CAN I MIX MX6 WITH MY EXISTING GREASE?
MX6 is a premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect it’s performance. Before using INOX-mx6 grease, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 in a grease gun.
WHAT DOES NO MELTING POINT MEAN?
INOX MX6 is a clay based grease which has no melting point. A grease’s melting point is the temperature at which the grease will melt and no longer sticks to surfaces. MX6 will always adhere to a surface no matter how hot it gets.
WHAT IS THE MAXIMUM TEMPERATURE THAT INOX IS EFFECTIVE TO?
INOX MX6 will operate non stop to 250 ºC all day with short bursts up to 300 ºC without breaking down.
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof. For any other statements or certifications, please email us at email@example.com or call us on +61 7 3209 8733
FOOD GRADE APPROVED: Australia: Instrument of Approval is available on request. New Zealand: Approved MPI – C15 (All animal product except diary) Internationally recognised USA FDA: NSF H1 Registered
KOSHER CERTIFICATE: K-ID FML-QVTB Status: Pavere
Copies of Food Grade Approvals, Kosher Certificate & Testimonials can be downloaded from the INOX-mx6 SDS page. They can be emailed, faxed or posted directly to the recipient from Candan Industries P/L. Email firstname.lastname@example.org to request any other certifications like allergen and non haz Decleration.
Thank you for the opportunity to give your company feedback on a great Aussie product. Inox is as
much an Aussie icon as Vegemite. At home and in the workshop we use all the different Inox products
(my husband was so happy when he found he could buy it wholesale he ordered everything!).
At Essentially Delicious we tested many different lubricants/sealants before we settled on INOX. We
needed a product that fitted our company ethos of natural and non-toxic. The MX6 food grade grease
fitted our criteria and has proven to be a great product with excellent mechanical properties. The
rubber seals in the whipper mechanism of the coffee machines last twice as long as they used to now
we lubricate the spindle with INOX. It is consistently reliable under both the extreme heat and freezing
conditions you would expect to find in espresso boilers and frozen drink machines.
We worked hard to make our product - Fruizia Frozen Fruit - which is aimed at children and school
canteens - the most natural on the market. It makes sense that we would supply the most natural
organic lubricant available to seal and protect our equipment as well as the health of the children.
Other products on the market all contain petroleum bi-products which we reject as not fit for human
consumption under any circumstances. Like our Fruit Slush Inox contains nothing nasty.
Now we supply a free tube with every slush machine, hot chocolate and coffee machine we sell and it
is a regular stock line alongside the slush, cups and straws for regular machine maintenance.
Our customers have also expressed their satisfaction with the product to me and now order extra
tubes to use on their other equipment. I happily recommend Inox to all my friends and customers.
To the company and its management – who I have to say are also consistently excellent to deal with –
congratulations on a great product and excellent service. I wish you every success with inox on the
world market - it is a world beater in our estimation and deserves recognition as another uniquely
Janet Dixon-Hughes Director Essentially Delicious "