MX11 Chain & Brake Cleaner

Chain & Brake Clean

MX11 Chain & Brake Cleaner

Readily removes oil, grease & brake fluid without disassembly, leaving surfaces clean and dry.

Available Sizes

500 gram aerosol cans and 20 litre drums

INOX MX11 Chain & Brake Clean readily dissolves oil, grease and grime and can be used as a degreaser for car, motorbike, truck, boat, industrial, mining, farming equipment parts, gears, cables, engines or on any equipment where there is contamination from any oil, grease or oil/grease dirt mixtures.

Why MX11?

  • INOX MX11 Chain & Brake Clean is a fast acting degreaser for removing brake fluid, oil, grease or oil/grease dirt contaminants from chains and brake assemblies (including linings and pads) before or after disassembly, leaving them bone dry and squeaky clean in a matter of minutes with no residue. In instances where the oil/grease and dirt is caked on, a second application maybe required and at the same time it is advisable to use a firm non-metallic bristled cleaning brush to help loosen any caked on contaminant.
  • INOX MX11 Chain & Brake Clean is a solvent based cleaner that dries in minutes and leaves no residue.

CAUTION: Avoid direct contact with rubber and perspex and prolonged contact with neoprene and plastics. Use in a well ventilated area.

Comments

  1. Is MX11 Chain & Brake Cleaner suitable for cleaning a motorcycle chain with ‘O’ ring’s or will this product cause damage.

    • charmaine says:

      Hi Dave,

      INOX MX11 will not affect your rubber, so long as you wipe off all excess from the chain and use a chain lubricant afterwards, such as INOX MX9 No Chukka Chain Lube.

      Regards, The INOX Team.

Leave a Comment

*