INOX-MX3 for Farming & Mining

Inox lubricant has a wide and well rounded application for the ongoing maintenance and smoother operation of all types of machinery, plant and equipment used for the farming, mining and earth moving industry.

Farm Machinery & Equipment

TRACTORS

INOX readily PENETRATES rust and corrosion to free up wheel nuts and track and blade bolts, exhaust manifolds and systems, splines and drive couplings and any other corrosion seized up equipment. INOX gives protection from moisture and corrosion and stops nuts, bolts and parts from seizing up, makes them easier to undo next time around. LUBRICATES linkages, cables, splines and couplings, hinges and locks, stops them from freezing up in sub zero temperatures. PROTECTS electrical systems. Spray INOX into switches, light fittings, starter motors, generators, alternators, battery cables and terminals to protect against moisture and corrosion.

HARVESTERS

Use INOX to free up, lubricate and protect chain & sprocket drives, splines and couplings, metal bushes, linkages, cables, locks & hinges, all electrical fittings, cable and equipment on all grain, fruit, vegetable, cane harvesting and picking equipment. INOX lubricant is compatible with hydraulic oil and hydraulic systems. Spray INOX on the cutting blades and separator fingers (forks) at the front of combine harvesters to protect them from moisture and corrosion in the lay off season.

STATIONARY PLANT & EQUIPMENT

For LUBRICATION and PROTECTION from corrosion and moisture, spray INOX into and on all electrical fittings and systems, battery cables and terminals, power generating plants, irrigation pump motors, travelling irrigators, winches and cables, open sprockets & gears and linkages on windmills, pneumatic & electric power hand tools, chain saws, wrenches & hand tools, taps and dies (INOX is a good cutting lubricant). Linkages, cables and electrical systems on stationary gasoline & diesel engines.

SHEEP SHEARING

Use INOX to LUBRICATE combs & cutters, hand pieces, over head gear, hand piece connecting drive shafts & elbow gears. INOX keeps combs, cutters and hand pieces in good condition and free from corrosion between shearing seasons.

POULTRY & EGG FARMS

INOX is very good for the lubrication and protection from corrosion for feed lines, conveyors and chains used in poultry and egg production sheds. In egg grading and packaging lines, use INOX to lubricate and protect the conveyor bearings and bushes, electrical systems the egg washing plant, grading and sorting machinery, keeps equipment in a good corrosion free condition, will not harm eggs and eggs will not stick to INOX.

“We process 60,000 of our own eggs every day. We have tried different products like WD40 and CRC and found them to be nowhere near as good as INOX. We use INOX in the egg producing sheds for lubricating the production line machinery and for stopping corrosion. On the egg washing, sorting and packaging plants, INOX stops all the problems with lubrication and corrosion that we were having with other similar type products. It keeps all the machinery in good condition, it has no effect on the eggs and we will keep using it. Works very well”. The Egg And I – Tweed Heads, AUSTRALIA

Mining Machinery & Plant

EARTH MOVING MACHINERY

INOX lubricant will penetrate and lubricate rusted and corrosion frozen track and blade bolts and nuts, splines and couplings, exhaust systems, air brake parts, fuel injectors, door hinges & locks, bushes & bearings, etc. With HEAT SEIZURES on the larger diesel engines (D series/equivalent upwards) pour half a litre of INOX lubricant down each fuel injector port and leave for approximately 12 hours. In most instances this will free up the pistons and rings and allow the machinery to recommence operations saving on costly down time and overhauls. INOX can be used 3 times for this application before the engine requires a full overhaul. INOX will keep electric starter motors, alternators/generators, air starters, lights, solenoids, switches, circuits, pneumatic systems and other electrical parts and fittings lubricated, corrosion and moisture free. INOX will not harm or effect hydraulic parts, fittings or systems.

SALT MINING

INOX is very effective as an anti-corrosion lubricant for electrical parts and fittings on plant & machinery used in the salt mining and processing industry. INOX can be sprayed directly into starter motors and alternators/generators for lubrication and protection from corrosion.

WINCHES, CABLES, SHACKLES, SPLINES & COUPLINGS

INOX will keep these lubricated, easy to do , undo and strip and free from corrosion & moisture.

UNDER GROUND PUMP MOTORS & ELECTRICAL SYSTEMS

INOX will keep this equipment free from moisture & corrosion. Should any pump motors, electrical parts or fittings go under water(under ground mine or above ground flood) the equipment or fitting should be flushed with fresh water and a liberal coat of INOX should sprayed inside and out, then allowed to drain for a couple of hours. This will remove any residual moisture and stop corrosion from starting and in the greater majority of cases allow the equipment to go back into immediate service thus saving on costly repairs. INOX can be readily used on all DC, single and multi-phase alternating currents.

AGGREGATE GRADING AND CONVEYOR SYSTEMS

Anywhere there is a high moisture or dust problem around machinery. Use INOX to flush bushes and bearings, sprockets and chains and couplings clean, lubricate and corrosion free. INOX has a self cleaning action and can be used over and over without first cleaning it off. INOX is also non-static.

Caution: Inox may effect some natural rubber products with continual long term use.