MX9 No Chukka Chain Lube

Superior grade, high speed, extreme pressure, PTFE chain lube.

General Info
Applications & Uses
Discussion
SDS & Technical Data

Originally designed for the motorbike industry, INOX- MX9 No Chukka Chain Lube is now in high demand for numerous applications such as, hoists, harvesters, forklifts, conveyors and dirt bikes.

The perfect blend of PTFE and tackifiers allow this chain lube to not only hold on but at the same time give you smooth effortless transmission in any application.

Demand is particularly high in the harshest of farming conditions as INOX-MX9 is one of the most robust , durable and reliable chain lubes on the market today.

Available Sizes:

300gm Aerosol Can

INOX-MX9 No Chukka Chain Lube is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers, coagulants, anti-corrosion and water proofing compounds to make it stay on the chain, hence the name ‘No Chukka Chain Lube’.
INOX-MX9 No Chukka Chain Lube contains the extreme pressure friction modifier PTFE (polytetrafluoroethylene) which gives increased lubrication, reducing wear and also helps in reducing operating temperatures.
INOX-MX9 No Chukka Chain Lube is highly resistant to salt, chemicals, water wash out and drying.
INOX-MX9 No Chukka Chain Lube will not harm motorcycle chain ‘O’ rings

It is recommended to clean the chain first by spraying it with INOX-MX11 Chain & Brake Clean. This will clean the chain and will leave it dry in a few minutes with no residue.
Next spray INOX-MX9 No Chukka Chain Lube directly onto the chain by using the extension tube attached to the spray button, this will give the best results for accuracy and concentration and reduces the problem of over spray. Make sure you spray this on the underside of the chain and be sure to “roll it through” so all links are covered.
Allow a few minutes (3 to 10 mins depending on the ambient temperature) for chain lube to penetrate the chain linkages and for the solvent carrier and propellant gas to evaporate.

2 comments on “MX9 No Chukka Chain Lube”

Carley on July 20th, 2022 - 9:07am

Good morning,
Could you please advise if Inox Mx9 No Chukka Chain lube is food grade?

Reply
- Suzanne Thomas on August 10th, 2022 - 10:31am
  
  Good Morning Carley
  No MX9 is not food Grade
  regards Inox Lubricants Team

SDS Downloads

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof. For any other statements or certifications, please email us at info@inoxmx.com or call us on +61 7 3209 8733

INOX MX9 No Chukka Chain Lube Nov 2021

pH	Not applicable
Vapour pressure	No data
Boiling Point	69°C (hexane)
Flammability Limits	LEL – 1.1%UEL – 7.5%
Flashpoint	-22°C (hexane)
Autoignition temperature	225°C (hexane)
Solubility in water	Expected to be insoluble.
Density	0.95 (approx)

Marine

Applications & Uses

Fishing

Applications & Uses

Manufacturing

Applications & Uses

Engineering

Applications & Uses

View All Applications & Uses

Store Locator

Inox products are available all over Australia and many countries throughout the world, use our search tool to find a retailer near you.

Find a store

Distributors

See all of the Inox Master Distributors around the world.

View Distributors

MX9 No Chukka Chain Lube

Superior grade, high speed, extreme pressure, PTFE chain lube.

Available Sizes:

2 comments on “MX9 No Chukka Chain Lube”

Leave a Reply Cancel reply

SDS Downloads

Marine

Applications & Uses

Fishing

Applications & Uses

Manufacturing

Applications & Uses

Engineering

Applications & Uses

Store Locator

Distributors

Subscribe to our email newsletter