Commercial Applications for Inox

Office Equipment

INOX MX3 lubricant is suitable for the servicing and maintenance of all office equipment. Use INOX MX3 to free any frozen parts, helps in the removal of and gives protection against corrosion reforming. Use INOX MX3 to lubricate shafts, slides, bushes, small pin and ball bearings in photocopiers, fax machines, paper shredders, typewriters, scales, cash registers, printers and adding machines.

Spray INOX MX3 onto a soft cloth to clean and polish office equipment and furniture. INOX MX3 stops computers keyboards from sticking. Spray INOX MX3 into electrical sockets, onto plugs and cable connectors to stop moisture and corrosion forming.

Use INOX MX3 to remove coffee and tea stains and polish the stainless sink in the office kitchen (dry the sink and spray a good coating of INOX MX3 on it and use a plastic scrubbing pad to clean off the stains and polish the sink, clean the INOX MX3 off with detergent and hot water) the sink will stay easy to clean for months.

Commercial Equipment

Concreting equipment:

Use INOX MX3 to protect trowels, floating screeds. mixer bowls, rotary finishing machines, stone and concrete cutting saw blades from corrosion between use. Stops concrete and mortar from sticking to window frames and glass, boxing and concrete mixers.

Spray LANOX MX4 on the outside of mixers before use, makes them easier to clean later. Stops moisture and corrosion problems with electric concrete mixer motors and other equipment.

Use INOX MX8 spray grease to lubricate bushes, open gears and chain drives. INOX products can easily be removed with INOX MX11, kerosene or dry cleaning fluid.

Laundry and kitchen:

Use INOX MX3 lubricant to penetrate and free up taps, valves, switches, solenoids and other corrosion frozen equipment.

INOX MX3 has a wide application for the repairs and maintenance of commercial washing machines, water extractors, dishwashers, dryers, refrigerators and food mixing machinery.

INOX MX3 stops the problems with moisture and corrosion in washing machines, water extractors and dishwashers, spray into switches, light fittings, solenoids, plugs and sockets, electric motors, cold room exhaust fan motors and all wiring circuits.

Use INOX MX3 to lubricate ceiling, air conditioning and cold room exhaust fans and equipment, electric drive motors, shafts, splines, bushes and chains.

INOX MX3 will help in the removal of stains on the outside of baking ovens.

CAUTION: When using any aerosol packaged INOX product, please allow a few minutes for the propellant gas (hydrocarbons) to dissipate before switching on any electric current. This procedure is not required for the non-aerosol packaged INOX products.

Mowers, chain saws, etc:

Use INOX MX3 to penetrate and free up bolts & nuts, bushes, bearings and shafts on rotary hoes, mower blades, splines, couplings. etc.

Spray on LANOX MX4 before reassembly for easier removal next time.

Use INOX MX9 to lubricate mower chain drives.

Use INOX MX8 spray grease to lubricate splines and couplings, wheel bushes and bearings on all commercial ride on mowers.

Use INOX MX3 for electric hedge trimmer blades, self oilers on chain saws, stops corrosion under chain saw links caused by corrosive timber resins.

Use INOX MX3 to lubricate control cables, on all electrical parts, fittings and battery terminals to stop moisture and corrosion forming.

Spray LANOX MX4 on frames and body panels before using equipment for the easier removal of mud, dirt and grass after use.

Use INOX MX3 to clean, polish and protect equipment and cutting blades between use from rust and corrosion.

Use INOX MX2 Battery Conditioner for all lead-acid batteries used in mowers and landscaping equipment for improved, trouble free longer battery life.

Printing:

Spray INOX MX3 anti-corrosion lubricant on offset printing plates and numerical collator units to protect them from moisture and corrosion between use, increases the shelf life of offset printing plates.

INOX MX3 is ideal to use for repairs, servicing and the on going maintenance of printing equipment.

INOX MX3 is compatible with printers ink and can be easily cleaned off with most mineral based solvents.

Pneumatic and electric powered hand tools:

Use INOX MX3 to lubricate all pneumatic and electric powered nailing guns, metal shears, drills, saws, planers, etc.

INOX MX3 stops moisture and corrosion build up in pneumatic power tools.

Use INOX MX3 for repairs, servicing and long term protection from corrosion and moisture between use.

Saws and cutting blades:

Spray INOX MX3 on timber, milling, saw mill, power and hand saw blades, hedge trimmer blades, large & small pruning shear blades, axes and machetes after sharpening and between use to protect them from rust and corrosion.

INOX MX3 will readily penetrate and free up frozen pruning shears, hedge trimmer blades branch loppers and keep them in a good serviceable working condition. Use INOX-mx3 as a lubricant on oilstones for sharpening chisels, electric and hand planer blades and other cutting blades.

Use LANOX MX4 to lubricate Wipper-snipper cable drums, hedge trimmers blades, will not burn or damage grass or hedges like solvent based lubricants will.

Plumbing:

INOX-mx3 will readily penetrate and free up frozen taps, cold and hot water valves and pipe fittings caused by rust and corrosion. INOX MX3 is a good thread cutting and tapping lubricant. Use INOX MX3 to lubricate and protect wrenches and hand tools from corrosion.

Use INOX MX6 and INOX  MX3FG grease for all tap and valve O rings.

INOX MX3FG lubricant and INOX MX6 grease are USA NSF Listed H1 Australia (Type A) Food Grade and potable water compatible.

Welders and welding:

Use INOX MX3 to lubricate wire feeds on MIG welders, it gives longer life to wire feed welding heads, reducing damage caused by the welding process.

INOX MX3 can be used for anti-splatter for electric welding of stainless steel and to protect ordinary steel welds from rusting before painting.

Use LANOX MX4 to protect welders from moisture and corrosion in the open air, after washing with white spirits. INOX-mx3 is powder coat compatible.

INOX LUBRICANTS HAVE A WIDE AND VARIED APPLICATION FOR THE REPAIR, SERVICE AND ON GOING MAINTENANCE OF ALL OFFICE EQUIPMENT, COMMERCIAL PLANT EQUIPMENT AND HAND TOOLS.